3บอร์ดควบคุม Servo 32 ตัว ผ่านคอมพิวเตอร์ Servo Controller compatible SSC32

1. Operating Current: 31mA
2. Analog output: 32
3. Current capacity: each side of the steering control up to 16, the maximum current capacity of 15A, 30A on both sides with a total capacity
4. Serial Input: USB/TTL232 (Baud Rate: 19200)
5. Servo Control Resolution: 0.09 ° / 1us (pulse width)
6. PC board size: 40mmx 50mm
7. Action Storage: 4KB

Driver  http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41

Software http://www.lynxmotion.com/p-895-free-download-ssc-32-servo-sequencer-utility-created-using-flowbotics-studio.aspx

AK-32 control instructions Introduction (description):

AK-32 servo controller via serial commands transmitted to achieve PWM outputs to control 32 servos ports.

# 0 P1500

The steering gear is connected to the servo 0 moves to the pulse width 1500us pin position (ie, generally 180 ° steering median).

# 0 P2250 T10000

The steering gear in 10 seconds to move from the original 1500 to 2250 the position corresponding to the position of the pulse width. (Ie timed move)

# 0 P750 S1000

This is the steering gear in 1.5 seconds go to 750 positions from 2250. (Ie fixed speed)

2250 (uS) -750 (uS) / 1000 (uS / Sec) = 1.5Sec

# 0 P1500 # 1 P1000

This instruction can try two servos were moved 1500uS and 1000uS location

# 0 P2250 # 1 P750 T1000

This directive makes steering pin number 0 from the last 1500uS a position to 2250uS, while steering the 1st pin location moved from 1000uS 750uS. Although two different steering angle turned size, but the two servo steering actions will be completed in one second later. (Synchronous movement)